DataLocker Pin Encrypted Hard Drives
Touch Screen PIN protection, keeping your data safe
Firmware Downloads
CAUTION: Not for use with Amacom eZsecure; Admin/Master Password will be erased when upgrading from v1.XX to v2.XX firmware. Admin Password utility will need to be re-initialised. Upgrading from any v2 to v2.03 will not erase the Admin Password.
| Model | Language | Version | Date | Size | Download |
| Master Password Utility | English | V 2.0 | 17/03/11 | 0.615Mb |  |
| Pro & Enterprise | English | V 2.03 | 14/01/10 | 0.77Mb | |
| Pro & Enterprise | German | V 2.03 | 14/01/10 | 0.77Mb | |
| Pro & Enterprise | French | V 2.03 | 14/01/10 | 0.77Mb | |
| Pro & Enterprise | Dutch | V 2.03 | 14/01/10 | 0.77Mb | |
| Pro & Enterprise | Spanish | V 2.03 | 14/01/10 | 0.77Mb | |
| Pro & Enterprise | Japanese | V 2.03 | 14/01/10 | 0.77Mb | |
| Pro & Enterprise | Korean | V 2.03 | 14/01/10 | 0.77Mb | |
| Pro & Enterprise | Italian | V 2.10 | 17/09/10 | 0.36Mb | |
- Disconnect all other USB external devices except Data Locker.
- Download the current version of your firmware.
- Unzip the firmware file.
- Connect your Data Locker by entering in your PIN number.
- Double click on the file named "Datalocker-xx.EXE"
- *Please Note, Windows Vista and Windows 7 users, please 'Right Click' and select 'Run As Administrator'
- Once connected. Hit the "Start Button" and WAIT.
- After update is completed, you may click Exit button on the bottom.
- Turn off the Data Locker power switch, wait 5 seconds and turn it on again. After getting connection successfully, you will see the new updated version number.
Firmware Update Instructions
- Disconnect all other USB external devices except Data Locker.
- Download the Master Password Utility tool.
- Unzip the utility file.
- Connect your Data Locker by entering in your PIN number.
- If using Windows Vista follow the next two steps, otherwise just double click to open the utility.
- Right Click on the file named "Datalocker-Pwd.EXE"
- Select 'Run As Administrator' and click allow on UAC options.
- Once loaded, leave the 'Current Password' box blank, and enter a new 6 to 18 digit PIN in the 'New Password' and 'Re-Enter Password' boxes.
- Click 'Set Master Password' button and 'Ok' to exit the utility.
- Turn off the Data Locker power switch, wait 5 seconds and turn it on again. After getting connection successfully, you will snow be able to access the device using either the User PIN or Administrator PIN.
